Ceramic products Ceramic Woven Tapes

Product Details:

REX ceramic fibre rope is manufactured from Ceramic Rope - Square & Round on the cover to form a solid packing, suitable for caulking and general thermal insulation application, with properties of low thermal conductivity and suitable for high temperature, etc.

REX Ceramic rope is reinforced with fibreglass filament and optional Inconel / alloy steel wire.



Advantages

• Low Thermal Conductivity.
• Will not burn or smoulder.
• Resistance to thermal shock.
• Resistance to vibration and stress.
• High tensile with Inconel wire reinforced.

Product Details:

Refractory Ceramic Fiber (RCF) Paper is produced from Alumina- Silicate fibres with the minimum addition of carefully selected bonds, which burn out cleanly in service. RCF paper has low shrinkage, good handling strength, and low thermal conductivity. It contains a small amount of organic binder for processing which makes it flexible and reduces off-gassing and odour during use. REX RCF Paper has highly uniform structure due to its controlled basis weight and thickness, assuring homogeneous thermal conductivity and a clean, smooth surface ideal for gasket or sealing. Its flexibility allows it to be wrapped or rolled to fit most complex configurations.

Advantages:

• High flexibility
• Good resistance to tearing
• Precise thickness
• Resistance to thermal shock
• Very low thermal conductivity

Product Details:

It is a soft, flexible cloth made of ceramic fibre yarn reinforced by steel wire with vermiculite coated. It is an ideal replacement for an asbestos product used for thermal insulation and heat protection. It will not burn, rot, mildew or deteriorate and resist most acids. It has a low coefficient of thermal expansion and is suitable for temperature up to 1050°C.

Applications: Used in welding blankets stress relieving, removable insulation covers, fire blankets, fire curtains, expansion joints, oven door seals, flue ducts, flue liner protection, Cable protection, Pipe wrap, High-temperature gaskets.


Advantage : Compared to uncoated Ceramic fibre, vermiculite coated Ceramic fibre fabric cloth has little irritation of skin and provides increased resistance to high temperature, flame, and abrasion. In addition, the vermiculite film helps to seal against gases and liquids. Vermiculite Coated Ceramic Cloth is completely non-flammable.

Product Details:

• Asbestos Tape is woven tapes for wrapping of exhaust pipes for hot cold insulation, electric cables, lining switch board fuse-box as joining material on doors of the oven.

• Asbestos Listing Tape available for insulation traction motor coils and in the electrical winding.

• Asbestos Tape Proofed with Heat Resisting Rubber Compound is available for the purpose of joining material as the manhole and mud-hole covers on Boilers Tanks.

• Similar to above but with Wire Reinforcement for Pressure Vessels.

Product Details:

Tetraglas is woven fibreglass tape made with type E texturized yarns. Available in both plain and drop wrap weave, it has continuous operating temperature of 1000°F / 540°C and has excellent resistance to most acids, alkalis and solvents. We also offer a lighter weight Industrial Grade material. Both constructs can be coated with Vermiculite or PTFE.Tetraglas 3000 is constructed from amorphous silica fibres and has continuous operating temperature of 2000°F/1090°C. It is also available as both plain and drop warp tape. Vermiculite coating can be added to this product to increase abrasion resistance.Ceramic fibre tape has a continuous operating temperature of 3000°F/1649°C. It is woven with an insert material of either glass fibres or Inconel wire for added strength and durability.

Product Details:

Ceramic Fiber Cloth is a woven fabric made from our high-quality ceramic fibre yarn. It is strong, lightweight, flexible and available in a wide variety of thicknesses, widths and densities.

Synonyms of product

• Ceramic fibre textiles
• Ceramic fabrics

Description:

Ceramic fibre cloth contains absolute amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

Ceramic Cloth is a woven fabric made from high-quality alumina silica fibre and especially mechanically needled for increased tensile strength and surface integrity in form of ceramic fibre yarn. It can be used for high-temperature applications up to 2300 F. The cloth is reinforced with fibreglass filament and optional Inconel/alloy steel wire. Ceramic fibre textiles feature excellent properties of lightweight, low thermal conductivity and chemical stability resisting attack from most corrosive agents. This cloth is widely used in welding, foundry works, aluminium and steel mills, boiler insulation and seal, shipyards, refineries, power plants and chemical plants.

Product wise application search strings:

These ceramic fibre cloths are used as heat insulation curtain, large area thermal insulation, radiant heat shielding and flexible fabric expansion joints.

Product Details:

REX Ceramic Fibre Sleeve is manufactured from ceramic fibre yarn, by the method of tubular braiding to obtain a flexible sleeve, suitable for caulking and general thermal insulation application, with properties of low thermal conductivity and suitable for high temperature, etc. Ceramic sleeve is widely used for hoses and cable protection material.
REX Ceramic Sleeve can be easily reinforced with either glass fibre yarn or metallic wire (stainless steel or nickel wire).

Advantages

• Low Thermal Conductivity
• Will not burn or smoulder.
• Resistance to thermal shock.
• Resistance to vibration and stress.
• High tensile with SS reinforced.

Product Details:

Ceramic fibre cloth is widely used as thermal insulation material in various industries. Woven from ceramic fibre yarns this ceramic fiber cloth are quality tested for dust control. An excellent heat insulating material, this cloth is a perfect alternative for asbestos cloth. The cloth laminated with aluminium foil on one side, can be easily reinforced with either glass fibre yarn or metallic wire (stainless steel or nickel wire). Ceramic Fiber ClothHigh Temperature Woven Ceramic Fiber Cloth.


Specifications:
Maximum Temperature: 650°C for Glass Fiber Reinforced Cloth-20°C ~+150°C (Fluor 1260°C) for Stainless Steel Wire Reinforced Cloth.


Normal Dimension: Thickness: 1.5~5.0mm. Width: 1000mm
Normal Packing: 30m/roll


Applications:

• Heat Insulation Curtain
• Large Area Thermal Insulation
• Radiant Heat Shielding
• Flexible Fabric Expansion Joints

Product Details:

We are reputed manufacturer and supplier of ceramic fibre sleeves that are used for covering high-temperature electric-insulating cable, wire and pipe. These ceramic fibre sleeves are woven from ceramic fibre yarns by the method of tubular braiding to obtain a flexible sleeve. Possessing excellent insulation and high-temperature resistant capabilities, it is widely used for hoses and cable protection material.

These ceramic fibre sleeves can be easily reinforced with either glass fibre yarn or metallic wire (stainless steel or nickel wire).